Folks
I am aware there’s been some discussion about stock levels, I believe due to a message on this website from a year ago mistakenly taken as being much more recent.
I can categorically state that stock levels are fine!
Many thanks, Howard
-
Recent Posts
Recent Comments
- Enzo on The New FUNcube Dongle Pro+
- N0ZGO on The New FUNcube Dongle Pro+
- N0ZGO on The New FUNcube Dongle Pro+
- Phil Karn on The New FUNcube Dongle Pro+
- Phil Karn on The New FUNcube Dongle Pro+
- Phil Karn on The New FUNcube Dongle Pro+
- Phil Karn on The New FUNcube Dongle Pro+
- Phil Karn on The New FUNcube Dongle Pro+
- Phil Karn on The New FUNcube Dongle Pro+
- Mike on FUNcube Dongle works with Windows 10!
Archives
- July 2015
- May 2015
- March 2015
- February 2015
- January 2015
- December 2014
- October 2014
- July 2014
- June 2014
- May 2014
- April 2014
- February 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
Categories
Meta
Hi Howard,
Any plans for a matching TX for the FCD?
Thanks!
-Mike
Hello Mike
We’re starting to develop a new device but it is quite a way off yet, so I wouldn’t hold your breath. I woudn’t call it an “FCD with TX” either.
The biggest problem is that if you need to transmit, you’re going to need some power, and a USB bus powered unit probably isn’t of much use unless you’re happy with a few 100 milliwatts.
A few of the key points of the FCD are that it’s small, it’s self contained, and doesn’t need tons of spaghetti cabling. These design rationales will be maintained in the next device. Beyond that we’re not promising anything!
Many thanks, Howard
Hi Howard,
Looking forward to your next product!
-Mike
Please let me know the current price of the “PRO” in US dollars.
TNX es 73,
Jerry W7QX
Hello Jerry
Including Fedex priority shipping, it works out to about $170 at the moment.
Many thanks, Howard
Is it possible to start monitoring at 50.00 MHz if input LP filter is accordingly modified or are there other limitations extending down to 50.0 MHz?
Hello Peter
I’m afraid the limitation is more to do with the LO than the filter. The PLL/divider scheme in combination with the VCO does not lend itself to stretching below about 51.5MHz.
Many thanks, Howard
Hi, Howard,
Thanks for the prompt dispatch of FUNcube dongle Pro 4421. Ordered Saturday night, received Tuesday morning. Not at all bad this close to Christmas. So it’s playtime now! woohoo!
Regards,
Julian.
(G1EKW)
Hi Howard,
I just ordered FCD Pro yesterday night, shipping to Canada. Should I expect any tracking info from FedEx to follow ?
Thanks in advance,
Nikolai / VE3NKL
Hello Nikolai.
Yes, I have received your order at 0155 UTC this morning. It will be processed today and should arrive with you on Friday. Once it’s processed, I’ll send you the tracking number.
Many thanks, Howard
Hi Howard,
Thank you very much for processing my order so promptly. It has arrived on time …
My best wishes to you and everybody “on the frequency” for the coming holidays. Merry Christmas !
Nikolai / VE3NKL
can i contact you via email
Thanks
Brett
KJ4RME
Hello Brett
I’ve sent you an email.
Many thanks, Howard