Folks<\/p>\n
Firstly, I apologise for the recent\u00a0lack of communication\u00a0on the website. This is purely down to lack of time on my part in conjunction with a welcome two-week vacation seeing family over in British Columbia, Canada, and the jet-lag that that entails. I believe it’s my first two-week vacation\u00a0in over ten years. The downside of\u00a0taking such\u00a0a long break\u00a0has been a deluge of correspondence\u00a0to face upon my return, something\u00a0that I’m still trying to catch up on, for which I apologise.<\/p>\n
Right now we’re already gearing up for a third (and even fourth) production run that’s due to start in the next ten days or so, although we are still receiving the last 100 or so assembled boards from the second production run.\u00a0So far we’ve been\u00a0ordering enough stock to run 1,000 for each run. This is very much a finger-in-the-air estimate. I am profoundly glad that we managed to fulfill all the pre-Christmas orders that were taken directly through the website, it was hard work! The board assemblers really pulled out all the stops and, with some help from\u00a0my extended family, we managed to get those units I’d\u00a0promised would be out before Christmas delivered, and then some. In fact, for a few days between Christmas and New Year we actually had a small positive inventory.<\/p>\n
Upon my return from vacation we’ve found that there have been some unforeseen discrepancies in\u00a0parts\u00a0stock, and this has delayed getting back up to speed on the remainder of the second production run. I used to think that managing\u00a030 or so discrete line items on the BOM (that is,\u00a030 unique parts)\u00a0for the original FCD was hard work. With 100 line items for the FCD+ it’s that much harder: one part on back order will delay everything. and substituting parts means re-testing. I take my hat off to those who do procurement on a daily basis, it really is hard and frustrating work. While it might not appear to be the exciting face of manufacturing, procurement is certainly an essential role that should be deeply appreciated.<\/p>\n
The good news is that I am led to believe that the SAW filters that are usually on a long lead time (10-12 weeks) are arriving in the next couple of days: these are the single most expensive parts of the FCD+ and already we’ve placed a full order for the fourth production run as a result of the lead time on them. (Side-note, and certainly\u00a0something they don’t teach you at college: the impact of Chinese New Year on parts delivery\u00a0is most definitely\u00a0not<\/em> to be under-estimated).<\/p>\n The bad news is that\u00a0the microcontrollers, due last week,\u00a0had been\u00a0pushed back to March while I was away\u00a0(don’t worry it’s not March, read on). These days I’m canny enough that although second sourcing isn’t always possible these days, at least I give myself the option a\u00a0few different devices: I learnt that, by luck,\u00a0from the original FCD. There are two different microcontroller chips that went out with the original FCD, not that anyone ever noticed, one had more memory than the other, but because that extra memory wasn’t needed, it’s left unused. However those of you who don’t have the “deluxe” extra memory version can rest assured that those who do are basking in unnecessary glory:\u00a0that extra memory\u00a0just means it takes longer for them to re-flash their devices.<\/p>\n The same applies to the FCD+, there are\u00a0a handful\u00a0of different microcontrollers that have been tested and\u00a0work in the FCD+, but,\u00a0similar to\u00a0the original FCD,\u00a0sourcing any of them\u00a0right now is proving\u00a0frustrating, I suspect because they’re all based on the same wafer die. I found it interesting that a phone call to the manufacturer seemed to bring that March date\u00a0forward to February 3. While I am grateful, I am scratching my head as to how all this chip manufacturing and assembly works!<\/p>\n The great news is that my assemblers have been kept abreast of this so, while there’ll be a\u00a0hundred or so\u00a0coming out over the next week or so from the final second production run, once those pesky\u00a0microcontrollers are in we’ll be pushing them out super-quick at the beginning of February. Indeed,\u00a0typically, once I receive units from the board assembler, they’re put in enclosures, re-tested, and out within one working day.<\/p>\n I truly thank you all for your patience while\u00a0I organise myself after my vacation, although I can’t promise it’ll be ten years before I take my next two-weeker.<\/p>\n Thank you all again, Howard<\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Folks Firstly, I apologise for the recent\u00a0lack of communication\u00a0on the website. This is purely down to lack of time on my part in conjunction with a welcome two-week vacation seeing family over in British Columbia, Canada, and the jet-lag that … Continue reading